[TRNSYS-users] TRNSYS-users Digest, Vol 62, Issue 30

Adrien JEZEQUEL - ITF a.jezequel at itf.biz
Thu Feb 18 07:38:38 PST 2010


Dear Mariana

You can change your TRNBUILD time base for Transfert function 
calculation in the same frame as OUTPUTS, if necessary.
The time step must be shorter than the time base and the time base 
should be a multiple of the time step.
If you have thin walls, you can define them as massless layer. In that 
case, you only have to define its thermal resistance.

Best regards
------------------------------------------------------------------------
www.itf.biz <http://www.itf.biz>
www.itf.biz <http://www.itf.biz>

	Adrien JEZEQUEL
Simulations Thermiques Dynamiques
*ITF*
	62, Rue du Bolliet
73230 St Alban Leysse
FRANCE
Phone :
Fax :
Mail:
	+33(0) 479 750 029
+33(0) 479 852 122
a.jezequel at itf.biz

/Afin de contribuer au respect de l'environnement, merci de n'imprimer 
cet e-mail que si nécessaire
Please, consider our environmental responsability before printing this email
/

Le 18/02/2010 15:46, ghetu mariana a écrit :
>
> Hello,
>
> I’m having a problem with TrnBuild. I’m trying to describe an office 
> tower in TrnBuild and it keeps sending error messages that either the 
> timebase is too small (it’s set for 1 hour, the default value) or that 
> the capacity of a wall is too small. Thing is the wall type creating 
> the error is just fine, its capacity is good. After I fix one wall 
> type I get an error message for a different wall type. I don’t know 
> where all this is coming from.
>
> By the way, there’s an error in type52 code. The computation of the 
> convection coefficient for water inside the tubes of the cooling coil 
> for laminar flow is done considering Nu=4.36. It might be a 
> simplification but it’s not ok.
>
> Best regards,
>
> Mariana GHETU
>
> Laboratoire Génie Civil et Génie Mécanique
>
> INSA de Rennes
>
>
>
> ------------------------------------------------------------------------
> *From:* "trnsys-users-request at cae.wisc.edu" 
> <trnsys-users-request at cae.wisc.edu>
> *To:* trnsys-users at cae.wisc.edu
> *Sent:* Thu, 18 February, 2010 15:23:02
> *Subject:* TRNSYS-users Digest, Vol 62, Issue 30
>
> Note: Forwarded message is attached.
>
> Send TRNSYS-users mailing list submissions to
> trnsys-users at cae.wisc.edu <mailto:trnsys-users at cae.wisc.edu>
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
> or, via email, send a message with subject or body 'help' to
> trnsys-users-request at cae.wisc.edu 
> <mailto:trnsys-users-request at cae.wisc.edu>
>
> You can reach the person managing the list at
> trnsys-users-owner at cae.wisc.edu <mailto:trnsys-users-owner at cae.wisc.edu>
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
> Today's Topics:
>
>   1. Re: Simplified heating and cooling based
>       onoperativetemperature (keilholz, werner)
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu <mailto:TRNSYS-users at cae.wisc.edu>
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>
>
> ---------------------------------------------------------------------------------------
> Orange vous informe que cet e-mail a été contrôlé par l'anti-virus mail.
> Aucun virus connu à ce jour par nos services n'a été détecté.
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>    
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100218/eaac37af/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: logo_itf_signature.jpg
Type: image/jpeg
Size: 2884 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100218/eaac37af/attachment-0005.jpg>


More information about the TRNSYS-users mailing list