[TRNSYS-users] Type 28

[Henrik Davidsson]

Dear all!

I'm working with type 28a. When I perform an "Energy balance check" the list file prints Maximum Error =  0.0000000000E+000. If I look in the printed output file and perform the same calculation as the operation code  (0.05 -1 -2 -3 -4 -5 -6) the result is 4.301 (kWh). How can type 28 deliver two different results using the same numbers?

Best regards

Henrik Davidsson
Energy and Building Design
Lund University
Sweden
e-mail, henrik.davidsson at ebd.lth.se<BLOCKED::mailto:henrik.davidsson at ebd.lth.se>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100217/f5979dac/attachment-0005.htm>