[TRNSYS-users] Error Type60 with more than 2 nodes

[David Bradley]

Gabriel,
  When you change the number of nodes in Type60 you have to be careful 
to be consistent. There are two questions that you must answer in the 
proforma - one on the "outputs" tab and one on the "derivatives" tab. Be 
careful also that the answer to the two questions is not quite the same. 
One asks how many nodes there are and the other asks how many there are 
apart from the top and bottom nodes.
Best,
 David


Gabriel ASAAD MARTINEZ wrote:
>
> Hi! I'm a TRNSYS 16 user and I have a I have a system which works 
> perfectly with type60 with only two nodes (one for the heating and one 
> for the exchanger), but when I try to use more nodes in order of 
> incrementing the accuracy, the simulation stops at first step without 
> indicate any TRNSYS error, I think is WINDOWS how bugs. I have tried 
> changing time steps and I have also check derivative.
>
>  
>
> Could you give me a suggestion to solve my problem please? Thanks a lot.
>
>  
>
> *Gabriel ASAAD MARTINEZ *Stagiaire
>
> *COSTIC*
>
> Domaine de Saint-Paul _ Bâtiment 16
>
> 102, route de Limours
>
> 78 471 Saint Rémy lès Chevreuse Cedex
>
> Tél : 01.30.85.20.10 / Fax : 01.30.85.21.07
>
> Site internet : _http://costic.com_
>
> _ _
>
> */Plus d'un siècle d'efficience énergétique au service des 
> professionnels/*
>
>  
>
>  
>
>  
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>   

-- 
***********************************************************************
Thermal Energy System Specialists (TESS), LLC 
David BRADLEY                      22 N. Carroll Street - Suite 370 
Partner                            Madison, WI 53703 
                                   USA
P: +1.608.274.2577 
F: +1.608.278.1475
E-mail: bradley at tess-inc.com 
Web Pages:  http://www.tess-inc.com    and      http://www.trnsys.com

***********************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100216/af92ffa1/attachment-0005.htm>