[TRNSYS-users] (no subject)

[Kersken, Matthias]

Dear Sek Jun-Yang!
 
Create one or more zones for each floor and adjance the floor to the
corresponding ceiling.
You might want to modify the convective heat transfer coefficients or use
auto. calculation.
 
Regards,
    Matthias Kersken
 

---

 



Dipl.-Ing. Matthias Kersken
Wissenschaftlicher Mitarbeiter / Abteilung Energiesysteme

Fraunhofer-Institut für Bauphysik 
Institutsteil Holzkirchen

Fraunhoferstraße 10
83626 Valley

eMail: Matthias.Kersken at ibp.fraunhofer.de
Telefon 08024 / 643-204
Telefax 08024 / 643-366
www.ibp.fraunhofer.de <http://www.ibp.fraunhofer.de/> 


Dipl.-Ing. Matthias Kersken
Research Associate / Department Energy Systems 

Fraunhofer Institute for Building Physics 
Branch Holzkirchen

Fraunhoferstraße 10
D-83626 Valley

eMail:  <mailto:Matthias.Kersken at ibp.fraunhofer.de>
Matthias.Kersken at ibp.fraunhofer.de
Phone +49 8024 / 643-204
Fax +49 8024 / 643-366
 <http://www.ibp.fraunhofer.de/> www.ibp.fraunhofer.de

 

 

 

 

 

 

 

 

 

 

 

 

 

---

 


  _____  

Von: #SEK JUN-YANG# [mailto:SEKJ0001 at ntu.edu.sg] 
Gesendet: Mittwoch, 10. Februar 2010 08:12
An: trnsys-users at cae.wisc.edu
Betreff: Re: [TRNSYS-users] (no subject)


Dear Users,
 
Is there any way that I can create a multi floor building using TRNbuild?
 
Regards,
Sek Jun-Yang

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100210/bc6fd388/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 7103 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100210/bc6fd388/attachment-0005.bin>