[TRNSYS-users] type 32 (cooling coil) issue

[Cramer Silkworth]

Hi All,

I'm having some problems Type 32, the simple cooling coil. It crashes a 
little way into the simulation (at hour 607.75) with an error about an 
enthalpy <0. However, it's at a time when the coil has airflow but no 
water flow (cooling is not required at this timestep). I see in the code 
of type 32 that if either flows are 0 (actually, <1e-6) then it should 
simply set outputs = inputs and return. Any ideas what's going on?

Thanks,
Cramer
-- 
*Cramer Silkworth
212 219 2255 | silkworth at transsolar.com <mailto:silkworth at transsolar.com>
Transsolar Inc. | 134 Spring Street Suite 601 | New York, NY 10012

Transsolar Climate Engineering
Technical consulting for energy efficiency and environmental quality in 
buildings.
New York - Stuttgart - Munich*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100211/d2ae2803/attachment-0001.htm>