[TRNSYS-users] HELP TRNSYS 16

[David BRADLEY]

David

> -How do you Know if the horizontal wall is floor o ceiling?
The TRNSYS 16 building model was non-geometric; when you define a 
horizontal surface, the only thing that indicates whether it is a floor 
or a ceiling is the condition that you impose on the opposite side of 
the surface.
> -Creating a Multizone Building,
>         when you have to decide the outputs,how can you select a 
> surface(to choose for example TOFL) instead of a Thermal zone?
there are a number of radio buttons across the middle of the window. You 
still select a zone but then you switch to "surface outputs" and you 
will see the available NTYPEs for the surfaces in that zone.
>         how can you do a multistorey building??
The ceiling of one zone is set as wall type "ADJACENT" and you indicate 
the name of the zone above whose floor is the same as that ceiling.
> I´m interested in create a model about TABS (thermal active building 
> system) which includes active layers
> -where can I find examples or tutorials with TRNSYS 16?
I believe that some of the feedback controller examples 
(..trnsys16\Examples\...) show how to use the active layers.

Best,
  David

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20101203/941472bd/attachment-0005.htm>