[TRNSYS-users] How to get the lighting consumption from TYPE56

[JIANG ZHU]

Dear Matt Duffy:
   Thank you very much for your sharing. i don't know how to use the equation to scale the gain, i can understand to set the schedule for the lighting and equipment consumption with different scale number. Would you please tell me more details about how to employ the equation to scale the gain? I really appreciate it. 

And i think QGCONV is the heat grain from convection, it is different from the energy consumption. 
Thank you very much!

Best regards!


Jiang ZHU 

 
------------------ Original ------------------
From:  "Matt Duffy"<duffy at tess-inc.com>;
Date:  Thu, Dec 30, 2010 10:30 PM
To:  "trnsys-users"<trnsys-users at cae.wisc.edu>; "zhujiang1124"<zhujiang1124 at gmail.com>; 

Subject:  Re: [TRNSYS-users] How to get the lighting consumption from TYPE56

 

 Dear Jiang,
 
 Did you look for the appropriate output (NTYPE) in the TRNBuild documentation. It appears taht QGCONV might work.
 
 On the other hand, we typically define our gains with schedule components from the TESS Applications Library and use EQUATIONS in the Simulation Studio to scale the gains accordingly which are then passed to Type56 as inputs for these different gains (lighting, equipment, occupancy). We can then calculate and output these gains in the Simulation Studio with a Type46 Printegrator.
 
 Best regards,
 
 Matt Duffy
 
 ----- Original Message -----
 From: zhujiang1124 at gmail.com
 Sent: Wed, December 22, 2010, 9:52 AM
 Subject: [TRNSYS-users] How to get the lighting consumption from TYPE56
 
 Hey, there!
 Does anyone know how to get the lighting and computer consumption from the building type56? I already set up everything well in the TREDBUILD, but i dont know how to get the output. Thank you very much
  
  
 Best Regards!
  
 Jiang
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20101231/a5253b5f/attachment-0001.htm>