[TRNSYS-users] Type56 - external type

[Adrien JEZEQUEL - ITF]

Dear Massimiliano Nardi,

I am not sure to understand what you want to do, but you can create a 
wall with a mass less layer in type56 (use the "wall type manager" and 
create a massless layer in "layer type manager") and define your 
category wall as "BOUNDARY" with the temperature you want as boundary 
condition.

Otherwise, you can put a virtual window between your thermal zone and a 
special zone in which ambiant temperature is controlled, to take into 
account your temperature as boundary condition.

Best regards
------------------------------------------------------------------------
www.itf.biz <http://www.itf.biz>
www.itf.biz <http://www.itf.biz>

	Adrien JEZEQUEL
Simulations Thermiques Dynamiques
*ITF*
	62, Rue du Bolliet
73230 St Alban Leysse
FRANCE
Phone :
Fax :
Mail:
	+33(0) 479 750 029
+33(0) 479 852 122
a.jezequel at itf.biz

/Afin de contribuer au respect de l'environnement, merci de n'imprimer 
cet e-mail que si nécessaire
Please, consider our environmental responsability before printing this email
/

Le 21/12/2010 14:32, Max N a écrit :
>
> Dear TRNSYS users,
>
>
> I’m trying to link Type56 with an external type that models a wall 
> with particular characteristics.
>
>
> My idea is to create a wall composed by one massless layer with a very 
> low resistance (0.01 mq K/kJ or lower) and to assign a temperature as 
> boundary condition(that is the output of my type). I tried but I had 
> convergence problem.
>
>
> Is there another method to link type56 with an external type?
>
>
> Is there the possibility to eliminate the resistance of the massless 
> layer?
>
>
> Thank you for the collaboration,
>
> Best regards,
>
>
> Massimiliano Nardi
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20101222/ff6a438b/attachment-0001.htm>