[TRNSYS-users] Re : Re: Psychrometrics

[Jérôme Deroche]

Your answers are right.
Thank you very much



Jérôme DEROCHE
Ingénieur d'études

CEDRE

Tel: 04 92 96 03 77
Port: 06 25 11 21 93
Ophira 1, 1 place Bermond
06560 SOPHIA-ANTIPOLIS



Message original Re : Re: [TRNSYS-users] PsychrometricsDe : David BRADLEY <d.bradley at tess-inc.com>
A : Jérôme Deroche <deroche.jerome at cedre-sophia.com>
Date : 2010-12-16 19:51:05


 Jérôme,
   What is most likely happening is that at a pressure of 1atm, your combination of the dry bulb temperature and the absolute humidity ratio are on the wrong side of the saturation line. Since that is physically impossible, the psychometric routine  keeps your dry bulb temperature and resets the absolute humidity ratio to the value it would be if the relative humidity were 100%.
 Best,
  David
 
 
 On 12/16/2010 04:21,  wrote: Hello,
 i'm using a psychrometrics type with dry bulb temperature and absolute humidity ratio in inputs. Pressure input is set to 1 atm.
 
 I have noticed that sometimes there is a difference between the input humidity ratio and the output humidity ratio. The difference ratio is about 1 to 12%.
 
 Could someone explain to me why this difference happens?
 
 Thank you 
 
 Jérôme DEROCHE
 Ingénieur d'études
 
 CEDRE
 
 Tel: 04 92 96 03 77
 Port: 06 25 11 21 93
 Ophira 1, 1 place Bermond
 06560 SOPHIA-ANTIPOLIS
 
 
 _______________________________________________ TRNSYS-users mailing list TRNSYS-users at cae.wisc.edu https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users 
 -- *************************** David BRADLEY Principal Thermal Energy Systems Specialists, LLC 22 North Carroll Street - suite 370 Madison, WI 53703 USA P:+1.608.274.2577 F:+1.608.278.1475 d.bradley at tess-inc.com http://www.tess-inc.com http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20101217/6f637ed1/attachment-0001.htm>