[TRNSYS-users] TRNSYS error

[Tshewang Lhendup]

Dear all,

I am working on simulation of a solar combined borehole thermal storage for 
heating and cooling residential buildings using TRNSYS 17. The main Types 
used in the model are Type 505b, 557a and 56.When I run the simulation I get 
following error.

TRNSYS Message    427 : An OUTPUT from the specified component model has 
been written to the global OUT array in a location beyond the allocated 
number of outputs from this model. Please check the component carefully to 
insure that INFO(6) is set correctly. The simulation has been aborted to 
avoid problems caused by over-writing the outputs from other component 
models  Reported information  : Not available.

As suggested in the TRNSYS archive, I looked at the *.lst and *.log files. 
The error is generated by the Type 505. This error is very frequent and most 
of the time I am able to debug by trial and error. But this time, I am not 
able to do it. I suspect with the array size. Does any one have know what I 
need to do. I cannot proceed further in my work due to this error.

With best regards,
Tshewang Lhendup

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100831/63addeef/attachment-0005.htm>