[TRNSYS-users] Skyscraper-Energy consumption of the higher levels

[Frédéric Oleksandrow]

Hello trnsys users,

I'd like to modelize energy consumption for a skyscraper.
I assume that energy consumption is not the same at the 1st floor than at the 70th floor.
How can I take in consideration the wind effects, the stack effect, ...for the 70th floor with trnsys ?

Thanks to anybody who can help me,

Salutations distinguées,
  Frédéric Oleksandrow-Ingénieur Civil en Energie
  project engineer

   VK ENGINEERING
  Building Services

   Avenue Clemenceau 87
   B-1070 Bruxelles Brussel
   Belgium
   T   +32 2 414 07 77
   F   +32 2 414 04 98
   E   frederic.o at vkgroup.be<mailto:frederic.o at vkgroup.be>
   W  www.vkgroup.be<http://www.vkgroup.be/>
P Denk aan het milieu vooraleer je dit bericht uitprint - Avant d'imprimer, pensez à l'environnement - Before printing, think about the environment

**** DISCLAIMER ****
This communication is confidential and for the sole use
of the addressee. If you are not the intended recipient,
please immediately notify the sender by e-mail at the
address shown and then delete it from your system without
copying, disclosing or forwarding its contents. Thank you.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100810/e655f405/attachment-0005.htm>