[TRNSYS-users] Parametric Analysis using TRNSYS

[Matt Duffy]

Dear Nino Losurdo,The way I would implement parametric analysis with buildings is to create multiple buildings(with different thickness and thermal properties as you mentioned), *.bui's, and then to ASSIGN different logical unit numbers to these different buildings. Then you run the parametric table with the different logical unit numbers for that particular parameter.Best regards,Matt Duffy
----- Original Message -----From: "Nino Losurdo" >;ninolosurdo at gmail.com

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100802/4e263a9c/attachment-0005.htm>