[TRNSYS-users] [TRNSYS USER] Problem with Type 125 -Trnsys3D printer

[Matt Duffy]

Dear Vincent,

I had someone ask about this yesterday. Please make sure that you connect your zone temperatures to the Type125 TRNSYS3D Printer in the Simulation Studio. This is briefly mentioned in the tutorial, but there is not a screen shot. At the end of the simulation, the *.eso should have different values in it for each hour of the year (not constant values).

Best regards,

Matt Duffy






----- Original Message -----
From: "vincent.coste at amoes.com" >;vincentcoste12 at gmail.com
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100818/2a282f14/attachment-0001.htm>