[TRNSYS-users] night ventilation, type8b

[Mariëlle Nuchelmans]

Hi all,

I want to model a nightventilation system with following setpoints:

Switch on when roomtemperature is 23 degrees, switch off when roomtemperature is below 19 (hysteresis)

I use type8b. But it only gives a coolsignal when I set the deadband on 0 degrees, but I should set it on 4 degrees. But then I never get a coolsignal. What am I doing wrong?

Met vriendelijke groet,

Mariëlle Nuchelmans

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100415/d6bfa754/attachment-0005.htm>