[TRNSYS-users] File name error- Type56

[David Bradley]

Rambod,
  The "run TRNSYS" feature in TRNBuild allows you to run your building 
with a very simplistic input file; you have to make sure that all your 
path names in TRNBuild's options are correct. The feature is normally 
used only to get results for a particular standard German test. I would 
instead recommend that you create your building in TRNBuild but run the 
simulation from the Simulation Studio as this is the "normal" way of 
operating. You can find a number of example simulations already set up 
in the ..\Trnsys16\Examples\ directory.
Kind regards,
 David


Rambod Rayegan wrote:
>
> Dear TRNSYS users,
>  
> I have started self-training TRNSYS for my PhD disseration couple of 
> weeks ago. I have encountered an error to run a simple building using 
> Type56. After Clicking on "maximum heat load calculations' it asks 
> "calculations terminated" or "run TRNSYS". When I click on "run 
> TRNSYS"  a file name error appears that says the file C:\... does not 
> exist.
> My second question is if I select "calculation terminated" where the 
> results will be stored.
>  
> I would really appreciate it if anybody help me to remove the error 
> and see some numbers as results.
>  
> Thanks,
>  
> Rambod
>
>  
> ------------------------------------------------------------------------
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>   

-- 
***********************************************************************
Thermal Energy System Specialists (TESS), LLC 
David BRADLEY                      22 N. Carroll Street - Suite 370 
Partner                            Madison, WI 53703 
                                   USA
P: +1.608.274.2577 
F: +1.608.278.1475
E-mail: bradley at tess-inc.com 
Web Pages:  http://www.tess-inc.com    and      http://www.trnsys.com

***********************************************************************