[TRNSYS-users] Trnopt Problem

[Timothy McDowell]

Vincent -

TrnOpt16 does not work with GenOpt 3.  You need to download GenOpt 2.1 to
use with TrnOpt16.

TrnOpt17 will work with GenOpt 3.

Tim



----------------------------------
Timothy McDowell
Executive Vice President
Thermal Energy System Specialists, LLC
22 N. Carroll St, Suite 370
Madison, WI 53703
Phone: 608-274-2577
Fax: 608-278-1475

----- Original Message -----
From: "Partenay, Vincent" <vincent.partenay at cstb.fr>
Sent: Thu, April 8, 2010 8:30
Subject:[TRNSYS-users] Trnopt Problem



















Dear all,



I would like to use Trnopt but I’m faced to the following
problem :

When I run a project optimisation, the first simulation (Trnexe)
is completed succesfully, and I get the following message in the genopt
window
:

“Assigning 2 threads for simulations.

Initialize.

Simulation 1: Results = 19.95145335450959

Simulation 1: Lt       = 1.0

genopt.lang.OptimizerException:

Program error. Attempted to delete non-temporary file.



GenOpt terminated with error.

See logfile for further information.”



And there is no additionnal information in the logfile about this
error…

Is there anybody who could help me ?

Thanks in advance,



Regards





Vincent PARTENAY

Energies Renouvelables - Département ESE



Centre Scientifique et Technique du Bâtiment

290 Route des Lucioles BP 209 – F 06904 Sophia Antipolis
Cedex

Tél : +33-(0)4-93-95-67-21

Fax : +33-(0)4-93-95-64-31

Évitez d’imprimer vos emails inutilement. Respectez
l’environnement









_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users


----- End of original message -----