[TRNSYS-users] equation

Hermann Schranzhofer hermann.schranzhofer at tugraz.at
Tue Apr 6 07:33:35 PDT 2010


Dear Marcus and Roman,

 

it is even simpler if you use the FORTRAN notation. Thus the equation in TRNSYS can be written in x**(1/2)

 

Best regards,

Hermann.

 

 

_______________________________________________________________

 DI Dr. mont. Hermann Schranzhofer
 Institut fuer Waermetechnik / Institute of Thermal Engineering
 TU Graz / Graz University of Technology       
 Inffeldgasse 25 / B, A-8010 Graz      

 Tel.:  +43 316 873 7314
 mobil: +43 664 60 873 7314
 Fax :  +43 316 873 7305
 http://www.iwt.tugraz.at/
_______________________________________________________________

  

________________________________

Von: Jones Marcus [mailto:Marcus.Jones at ait.ac.at] 
Gesendet: Dienstag, 6. April 2010 12:24
An: 'Justine Roman'; TRNSYS users
Betreff: Re: [TRNSYS-users] equation

 

The square root of x is equal to x to the ½ power, so you could use the natural logarithm and its inverse. In a TRNSYS equation: exp(1/2*ln(x))

 

Marcus

 

MARCUS JONES, MSc

Energy Department

Sustainable Building Technologies 

 

AIT Austrian Institute of Technology 

Österreichisches Forschungs- und Prüfzentrum Arsenal Ges.m.b.H. 

Giefinggasse 2 | 1210 Vienna | Austria 

T +43(0) 50 550-6387 | M +43(0) 664 210 24 15 | F +43(0) 50550-6598

marcus.jones at ait.ac.at <mailto:marcus.jones at ait.ac.at>  | http://www.ait.ac.at <http://www.ait.ac.at/>  

FN: 165088b HG Wien | UID: ATU46577208 This email and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient, please notify the sender by return e-mail or by telephone and delete this message from your system and any printout thereof. Any unauthorized use, reproduction, or dissemination of this message is strictly prohibited. Please note that e-mails are susceptible to change. Österreichisches Forschungs- und Prüfzentrum Arsenal Ges.m.b.H. shall not be liable for the improper or incomplete transmission of the information contained in this communication, nor shall it be liable for any delay in its receipt. 

 

From: Justine Roman [mailto:justineroman at hotmail.com] 
Sent: April 6, 2010 11:40 AM
To: TRNSYS users
Subject: [TRNSYS-users] equation

 

Trnsys users,
 
I had some problem with using the equation in Trnsys. 
 
I need to put "sqrt" inside the equation but i don't find the special operator to do that ?
 
Can i have some help from you ?
 
Thanks a lot!
Justine.R

________________________________

Commander un cadeau en ligne discrètement? Voir la solution offerte par Internet Explorer8 <http://clk.atdmt.com/FRM/go/207186971/direct/01/> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100406/fe332d60/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Hermann Schranzhofer.vcf
Type: application/octet-stream
Size: 208 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100406/fe332d60/attachment-0005.obj>


More information about the TRNSYS-users mailing list