[TRNSYS-users] Chilled ceiling

[Kersken, Matthias]

Hello Mr. Dimitris!
 
In the Buildung Type56 output (NType) 58 is the fluid-Outlet-Temperature.
In the Building Type You can define the inlet-temperature and the massflow or set them as an input.
You may use an "itterative feedback controller" to control one of this two parameters in that way to achieve a certain outlet-temperature.
 
Did I understand Your question correct?
 
With kind regards,
    Matthias Kersken
 

---

 



Dipl.-Ing. Matthias Kersken
Wissenschaftlicher Mitarbeiter / Abteilung Energiesysteme

Fraunhofer-Institut für Bauphysik 
Institutsteil Holzkirchen

Fraunhoferstraße 10
83626 Valley

eMail: Matthias.Kersken at ibp.fraunhofer.de
Telefon 08024 / 643-204
Telefax 08024 / 643-366
www.ibp.fraunhofer.de <http://www.ibp.fraunhofer.de/> 


Dipl.-Ing. Matthias Kersken
Research Associate / Department Energy Systems 

Fraunhofer Institute for Building Physics 
Branch Holzkirchen

Fraunhoferstraße 10
D-83626 Valley

eMail:  <mailto:Matthias.Kersken at ibp.fraunhofer.de> Matthias.Kersken at ibp.fraunhofer.de
Phone +49 8024 / 643-204
Fax +49 8024 / 643-366
 <http://www.ibp.fraunhofer.de/> www.ibp.fraunhofer.de

 

 

 

 

 

 

 

 

 

 

 

 

 

---

 


  _____  

Von: Δημήτριος Ξεύγενος [mailto:d.xevgenos at gmail.com] 
Gesendet: Freitag, 9. April 2010 07:08
An: trnsys-users at cae.wisc.edu
Betreff: [TRNSYS-users] Chilled ceiling



Hi all,
In this kind of applications i have noticed from the various posts, that TRNSYS doesn't offer enough information i.e the fluid outlet temperature of the water.If so, how can someone define this information or the
cooling capacity of the panel?I hope someone can shed some light to this problem!
Thanks in advance,
Xevgenos Dimitris

National Technical University Of Athens

School of Mechanical Engineering

Thermal Section



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100409/352bd1dd/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 7103 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100409/352bd1dd/attachment-0001.bin>