[TRNSYS-users] Wood Chimney

[Matt Duffy]

Dear Roberto,

Type56/TRNBuild gives you the option of adding user-defined gains to a
zone. I would recommend this approach by adding a new "Gain Type" to your
zone, defining the convective/radiative split of this (wood chimney) gain,
making the appropriate inputs for this gain in Type56/TRNBuild, and
perhaps implementing a wood chimney component or function in the TRNSYS
Simulation Studio. It would be very wise to do some research - perhaps
ASHRAE would have some information. There are many different
configurations of firplaces. Most would create a stack effect to lower the
pressure of the zone and increase the infiltration. Temperature and
thermal storage of the chimney material will also have influence.

Best regards,

Matt Duffy



----- Original Message -----
From: "Roberto Ruiz Flores" <doppler83 at gmail.com>
Sent: Mon, September 28, 2009 23:47
Subject:[TRNSYS-users] Wood Chimney

Hi to everyone,



I need to study the influence of a focalized heat source (wood chimney) on
the general behavior of heating.

How can I do to modeling this chimney inside of the  type 56?



Thanks



_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users

----- End of original message -----