[TRNSYS-users] TRNBuild / Type56: Documentation on handling custom inputs

[PAUL COALES]

Thanks for your quick reply Olivier.



The following paragraph from 06-multizonebuilding.pdf confuses me:



"The heating requirement of any zone subject to idealized heating control
can be determined by specifying a heating type. If the heating equipment is modelled external to the
TYPE 56 component, the heating type should not be used. Instead, VENTILATION AIRCHANGE, TEMPERATURE and HUMIDITY should be defined as INPUTS, fed by outputs from the conditioning equipment component(s) or the supplied heating power should be
defined as CONVECTIVE and RADIATIVE GAINS. The specification of a heating control is
optional and the default setting of the heating control is off."


So I do use the Heating Regime to couple the heat source:  I just have to understand the radiative and
convective split of my emitter?


What role does the “set temperature” provide?  Zone temperature is an output to my
simulation and it is the simulation that controls whether the emitter is
receiving heat or not.


Thanks

Paul  


--- On Thu, 17/9/09, Olivier Guillemot <oguillemot at polenn.com> wrote:





From: Olivier Guillemot <oguillemot at polenn.com>
Subject: RE: [TRNSYS-users] TRNBuild / Type56: Documentation on handling custom inputs
To: "'PAUL COALES'" <coalespr at btinternet.com>, trnsys-users at cae.wisc.edu
Date: Thursday, 17 September, 2009, 10:35 AM






 







Paul, 

After having created
your input, you can use it in several screens in trnbuild, it depends what you
want to do.  

 

   

   

Cordialement, 

   

Olivier Guillemot 

_______________________________ 

POLENN 

Ingénierie de
la performance énergétique 

www.polenn.com 

   

Immeuble Oméga 

Rue Jean-Marie David,  

35 740 Pacé 

Tel: 02 23 46 14 36 

Fax: 02 90 92 00 71 

 

   

 Afin de
contribuer au respect de l'environnement, merci de n'imprimer ce courriel que
si nécessaire 

   



De : PAUL COALES
[mailto:coalespr at btinternet.com] 

Envoyé : jeudi 17 septembre 2009 11:27

À : trnsys-users at cae.wisc.edu

Objet : [TRNSYS-users] TRNBuild / Type56: Documentation on handling
custom inputs 



   


 
  
  Can anybody point me at documentation or examples, which
  show the handling of custom Inputs to Type56 in TRNBuild.

  

  I've followed 06-mulitizonebuilding.pdf.  This describes how to
  create a new Input field which will appear in the interface to a Type56
  instance within the Simulation Studio but it does not show how you use it for
  anything within your building model once you have created it.

  

  I'm trying to connect a heat source ( from emitters of a GSHP system ) to the
  described building.

  

  Thanks

  Paul 
  
 


   



 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090917/d1d3833a/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 8877 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090917/d1d3833a/attachment-0005.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 1851 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090917/d1d3833a/attachment-0003.jpg>