[TRNSYS-users] simplified weather data

[Matt Duffy]

Dear Khadijah Mohamad Syayuti,

If I understand you correctly, you only have to make one connection in the
TRNSYS Simulation Studio. Then (when you double-click on the connection)
you define how the outputs of your weather component (Type15) are
connected it certain inputs of your collector model.

Best regards,

Matt Duff



----- Original Message -----
From: "kaydee abira" <khadijah_syayuti at yahoo.com>
Sent: Thu, October 8, 2009 22:52
Subject:[TRNSYS-users] simplified weather data


Hello,

I'm working a simulation for large scale collectors for hot water system.
For the
collectors, which have to connect with the weather data, how can I
simplified the
system so that I can minimize the connectors which connect between the
weather data
and the collectors? I tried to connect every collector to the weather
data, but when
I run it error occurred. I'm using an evacuated tube collectors. Thanks.

Khadijah Mohamad Syayuti
Mechanical Engineering Department
Universiti kebangsaan Malaysia



      _______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users


----- End of original message -----