[TRNSYS-users] Theoretical flat-plate collector

[L.Mei at lboro.ac.uk]

Hi, I also met this problem.

Thanks!

Li Mei 

-----Original Message-----
From: Stefania Agosta [mailto:stefania.agosta at dttn.it] 
Sent: 09 October 2009 11:06
To: trnsys-users at cae.wisc.edu
Subject: [TRNSYS-users] Theoretical flat-plate collector

Hallo,

I'm using Type 73 to model a flat plate solar cllector for domestic  
hot water. What mostly surprise me is that the efficiency of the  
panel, which is calculated as (useful energy) / (incident solar  
radiation),  is lower than expected (30%-40% as a maximum, instead of  
80%-90%) even if I maximise all the parametres that affect the  
efficiency. is it a common

Best regards

Stefania Agosta
student at the University of Trento
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users