[TRNSYS-users] New component / changing number of variables inCVF

mathaeus.nierzwicki at solarenergy.ch mathaeus.nierzwicki at solarenergy.ch
Mon Oct 12 07:10:17 PDT 2009


Dear Knut-Erik, dear Jeff, dear all,

thank you for your quick responses. Even though the compilation was error-free, no changes appeared in the performa. Once again, I checked all options I have in order to manipulate the performa in TRNSYS studio and it should come out that after changing outputs in the fortran code and re-compiling the given Type, one has to

1.      open the “Performa” of the given Type in TRNSYS studio,

2.      include the given changes here,

3.      click “propagate properties” (top row of TRNSYS studio),

4.      check all the boxes in the “propagate properties / inheritance settings” window and

5.      click “ok”.

Thank you once again!

Yours,

mathaeus
________________________________
Mathaeus Nierzwicki
Forschung / Research
Institut für Solartechnik SPF: Adresse<http://www.solarenergy.ch/spf.php?lang=de&fam=44&tab=3> / Website<http://www.solarenergy.ch/spf.php?lang=de&fam=41&tab=1>
Hochschule für Technik Rapperswil HSR
Tel. +41 55 222 48 30
Fax +41 55 222 48 44
________________________________

From: Jeff Thornton [mailto:thornton at tess-inc.com]
Sent: Freitag, 9. Oktober 2009 23:01
To: knut.erik.enerstvedt at niva.no; Nierzwicki Mathaeus Lukas (mathaeus.nierzwicki at solarenergy.ch)
Cc: trnsys-users at cae.wisc.edu
Subject: Re: [TRNSYS-users] New component / changing number of variables inCVF

After re-compiling the source code did you link it to create a new DLL which contains your changes?  You may also have to remove any other DLL's that contain the previous source code....

Jeff

Jeff Thornton
President - TESS, LLC

22 North Carroll Street - Suite 370
Madison WI 53703 USA

Phone: 608-274-2577
Fax: 608-278-1475
E-mail: thornton at tess-inc.com
Web: www.tess-inc.com





----- Original Message -----
From: "" <knut.erik.enerstvedt at niva.no>
Sent: Fri, October 9, 2009 1:57
Subject: Re: [TRNSYS-users] New component / changing number of variables inCVF

Mathaeus,

I the number of outputs in the source code matches the number of outputs in the Proforma, then you should see the correct number of outputs when using your new component in the Studio. Make sure that you set Role to "output" when you define the new variable in the Proforma. You can click on the Outputs tab (after clicking on Variables) to see a list of all output variables.

Hope this helps,

Knut Erik




Dear all,

I am programming a new type for TRNSYS using Compaq Visual Fortran (cvf) and I would currently like to add some outputs. I alread y changed the number of outputs in the fortran environment to

1)      NOUT=2,
2)      I performed a simple calculation, eg a=2,
3)      and set an output as OUT(2)=a .

After recompiling still no changes appeared so I decided to extend the number of variables in my trnsys type environment (performa).

Even though, no changes appear – there is only one output available in the TRNSYS project environment.

Does any of you know an appropriate solution?

Sincerely

Mathaeus





------------------------------------------------------------------------------------------------------------
Meld deg på vårt nyhetsbrev på www.niva.no<https://webmail.fusemail.com/www.niva.no>
________________________________

_______________________________________________

TRNSYS-users mailing list

TRNSYS-users at cae.wisc.edu<javascript:bodyCreateMail('TRNSYS-users%40cae.wisc.edu')>

https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20091012/a589b698/attachment-0001.htm>


More information about the TRNSYS-users mailing list