[TRNSYS-users] Type56a: Automatic Heat Transfer Calculation Error

PAUL COALES coalespr at btinternet.com
Mon Nov 23 01:00:40 PST 2009


Hi Adrien,

I select "internal calculation" for  "Convective Heat Transfer Coefficient of Wall" for all my wall types; back and front.  Is this wrong?

Kind Regards

Paul

--- On Mon, 23/11/09, Adrien JEZEQUEL - ITF <a.jezequel at itf.biz> wrote:

From: Adrien JEZEQUEL - ITF <a.jezequel at itf.biz>
Subject: Re: [TRNSYS-users] Type56a: Automatic Heat Transfer Calculation Error
To: "PAUL COALES" <coalespr at btinternet.com>
Cc: trnsys-users at cae.wisc.edu
Date: Monday, 23 November, 2009, 8:27




  
  
Dear Paul



Your issue concerns Convective Heat Transfer Coefficient of wall in wall type manager.

You certainly select an internal calculation for an external wall in
your bui file, instead of userdefined.

Message error indicates that automatic heat transfer calculation is
only allowed on surface within a zone.



Best regards



 Je serai absent du 04
Décembre 2009 au 04 Janvier 2010


I will be absent from 04th December 2009 to 04th January 2010

  
    
      
      

      www.itf.biz
      
      Adrien
JEZEQUEL

Simulations Thermiques Dynamiques
    
    
       ITF

      
      62, Rue du
Bolliet

73230 St Alban Leysse

FRANCE

      
    
    
       Phone :

Fax :

Mail:

      
       +33(0) 479 750
029

+33(0) 479 852 122

      a.jezequel at itf.biz
    
  

Afin de contribuer au
respect de l'environnement, merci de n'imprimer cet e-mail que si
nécessaire

Please, consider our
environmental responsability before printing this email






PAUL COALES a écrit :

  Hi All

I have an error reported on a simulation run and need some suggestions as to what could be going wrong.

Fatal error at time 0.00
Generated by unit 3
Generated by Type56a

Message Error in automatic heat transfer calcualtation for surface 7 or it's adjacent surface.  Automatic heat transfer calculation is only allowed on surface within a zone.  Please check input file .bui

This is different to the example posted erlier in the year.  I am modeling underfloor heating here.

I tried deleting the surface 7 but this does not change the report.  I still refers to surface 7.

Any clues?  I can forward the .bui file if interested.

Kind Regards
Paul

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
---------------------------------------------------------------------------------------
Orange vous informe que cet  e-mail a ete controle par l'anti-virus mail. 
Aucun virus connu a ce jour par nos services n'a ete detecte.




  

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20091123/a0b3f8e2/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: logo_itf_signature.jpg
Type: image/jpeg
Size: 2884 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20091123/a0b3f8e2/attachment-0005.jpg>


More information about the TRNSYS-users mailing list