[TRNSYS-users] Trnsed Distributable

[Kent Beason]

I've created a Distributable file and copied all files that I need into
the same directory.  I am getting a fatal error when running the
Distributable by itself.  I don't get any errors when I run the
simulation within Trnedit.  The error reads as follows:

 

*** Fatal Error at time   :         0.000000

    Generated by Unit     :    33

    Generated by Type     :    96

    TRNSYS Message     71 : An ASSIGNED logical unit number is already
in use, either by the TRNSYS kernal or by a Type

    Reported information  : Not available

 

Attached is the section within the .trd file for Type 96 as used in my
simulation.  I've scoured it without finding obvious problems.  I
haven't found the logical unit numbers duplicated elsewhere in the list
file either.

 

Any deeper insights on what may be the problem, or other things to
check, would be most appreciated.

 

Kent Beason

Schlitterbahn Development Group

830-609-8904 m

830-608-8040 f

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20091119/f5fdf2aa/attachment-0005.htm>
-------------- next part --------------
* Model "Type96" (Type 96)
* 
*
**|*
**|* *** Model Type96 (Type 96, Unit 33)
**|*
CONSTANTS 3
**|*PARAMETERS																							VALUES			UNITS
SWITCHTO= 1.0000000000000E+00
**|Switch to observe off-peak weekend rates |-|-|0|1|0|1.000|1000
SWITCHT1= 1.0000000000000E+00
**|Switch to observe off-peak holiday rates |-|-|0|1|0|1.000|1000
MAXIMUME= 1.0000000000000E+04
**|Maximum excess power                    |W|W|0|1|-1000000.00000|1000000.00000|1000
CONSTANTS 1
**|*INPUTS																							VALUES			UNITS
PARALLEL= 0.0000000000000E+00
**|Parallel generation                     |W|W|0|1|-1000000.00000|1000000.00000|1000
*
UNIT 33 TYPE 96	 Type96
*$UNIT_NAME Type96
*$MODEL .\Utility\Utility Rate Schedule Processors\Type96.tmf
*$POSITION 1089 240
*$LAYER Main # 
PARAMETERS 6
53		! 1 Logical unit number for rate schedule input file
54		! 2 Logical unit number for text output
55		! 3 Logical unit number for spreadsheet output
SWITCHTO		! 4 Switch to observe off-peak weekend rates
SWITCHT1		! 5 Switch to observe off-peak holiday rates
MAXIMUME		! 6 Maximum excess power
INPUTS 8
31,1 		! Type95a:Hour of day ->Hour of the day
31,2 		! Type95a:Hour of year ->Hour of the year
31,5 		! Type95a:Month ->Month
31,7 		! Type95a:Year2 ->Year
Building_Latent		! Equa:Building_Latent ->Building load
31,8 		! Type95a:Weekend Flag ->Flag indicating weekend
31,9 		! Type95a:Holiday flag ->Flag indicating holiday
0,0		! [unconnected] Parallel generation
*** INITIAL INPUT VALUES
1 1 1 1999 0 0 0 PARALLEL 
*** External files
ASSIGN "Type96-UtilityRateScheduler.dat" 53
**|? Where is the utility rate schedule input file located? |1000
ASSIGN "UtilityBill.txt" 54
**|? Where should the text based utility bill output file be created? |1000
ASSIGN "UtilityBill.dat" 55
**|? Where should the spreadsheet utility bill output file be created? |1000