[TRNSYS-users] Data Limit Surfaces, type 56

[Thijs van Brakel]

Dear Trnsys users,

in the type 56 manual is stated that the amount of surfaces in a model is
limited at 999. I was wondering, when I have a wall with a window in it,
should I consider this combination as one surface or as two different
surfaces? When you work with a large model and a lot of fictive windows the
difference can be critical. Thanks in advance. 

Best regards,

 


 


Thijs van Brakel

 


Cauberg-Huygen Raadgevende Ingenieurs BV


Bezoekadres:

Wilhelm Röntgenstraat 4, 8013 NE Zwolle


Postadres:

Postbus 1590, 8001 BN Zwolle


Telefoon:

038 - 4221411


Fax:

038 - 4223197


E-mail:

t.vanbrakel at chri.nl


Web:

 <http://www.chri.nl/> www.chri.nl


KvK-nummer:

14623897


Disclaimer:

Op deze e-mail is een disclaimer van toepassing:
A disclaimer is applicable to this e-mail, please refer to:
 <http://www.chri.nl/emaildisclaimer> http://www.chri.nl/emaildisclaimer

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090513/e1370740/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 7599 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090513/e1370740/attachment-0005.gif>