[TRNSYS-users] Creating new components with g95
Eric Urban
ericjurban at gmail.com
Fri May 1 10:46:37 PDT 2009
I was able to successfully create a simple working component using g95. If
anyone else requires assistance with this, I can help out as much as I am
able. My email address is urbanej at appstate.edu
2009/4/30 <trnsys-users-request at cae.wisc.edu>
> Send TRNSYS-users mailing list submissions to
> trnsys-users at cae.wisc.edu
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
> or, via email, send a message with subject or body 'help' to
> trnsys-users-request at cae.wisc.edu
>
> You can reach the person managing the list at
> trnsys-users-owner at cae.wisc.edu
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
>
> Today's Topics:
>
> 1. Re: TRNBuild problem. (David Bradley)
> 2. Creating new components with g95 (Eric Urban)
> 3. Problem in tracing the runtime errors (a8304506 at graduate.hku.hk)
> 4. Re: Problem in tracing the runtime errors (David Bradley)
> 5. Re: single Room simulation (David Bradley)
>
>
> ---------- Forwarded message ----------
> From: David Bradley <bradley at tess-inc.com>
> To: baseplast <baseplast at mail.ru>
> Date: Wed, 29 Apr 2009 13:39:55 -0500
> Subject: Re: [TRNSYS-users] TRNBuild problem.
> Please contact the distributor from whom you originally purchased TRNSYS.
> If you aren't sure who to contact, please send me your user16.id file and
> I will find the right person. If you do not have the user16.id file,
> please send me your institution name, address, username, etc and I will try
> to find it in the data base.
> Kind regards,
> David
>
>
> baseplast wrote:
>
>> Hi,
>> had virus attack on my pc, lost the TRNBuild.exe file, please, can
>> anyone send me this file or upload somewhere?
>> version 16.002.
>>
>> tanx a lot
>>
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at cae.wisc.edu
>> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>>
>>
>>
>>
>>
>
> --
> ***********************************************************************
> Thermal Energy System Specialists (TESS), LLC David BRADLEY
> 22 N. Carroll Street - Suite 370 Partner
> Madison, WI 53703 USA
> P: +1.608.274.2577 F: +1.608.278.1475
> E-mail: bradley at tess-inc.com Web Pages: http://www.tess-inc.com and
> http://www.trnsys.com
>
> ***********************************************************************
>
>
>
>
> ---------- Forwarded message ----------
> From: Eric Urban <ericjurban at gmail.com>
> To: trnsys-users at cae.wisc.edu
> Date: Wed, 29 Apr 2009 19:00:27 -0400
> Subject: [TRNSYS-users] Creating new components with g95
> I don't know if anyone has addressed this yet, but has anyone successfully
> recompiled TRNDll.dll with a new type subroutine using the open source
> fortran 95 compiler g95? I am stumped.
>
>
> ---------- Forwarded message ----------
> From: a8304506 at graduate.hku.hk
> To: Trnsys discussion group <trnsys-users at engr.wisc.edu>
> Date: Thu, 30 Apr 2009 15:17:59 +0800
> Subject: [TRNSYS-users] Problem in tracing the runtime errors
> Hello, Trnsys users.
>
> I get an "Invalid floating point operation" error when running a
> simulation.
> However, I can't find any information about the error source in the .lst
> file.
> Does anyone know if there is any method to trace at which component (and
> hopefully at which line) does the error come from? Your reply is
> appreciated.
> Thank you!
>
> Best Regards
> LEE, Chun Kwong
> Division of Building Science and Technology
> City University of Hong Kong
>
>
>
>
>
>
>
>
> ---------- Forwarded message ----------
> From: David Bradley <bradley at tess-inc.com>
> To: a8304506 at graduate.hku.hk
> Date: Thu, 30 Apr 2009 11:31:16 -0500
> Subject: Re: [TRNSYS-users] Problem in tracing the runtime errors
> Chun Kwong,
> An invalid floating point error is a generic error generated by the DLL
> when a problem was not caught in the code. For example, a division by zero
> or sometimes taking the log of a negative number will cause an invalid
> floating point error. The fortran code of the Type should always check such
> arguments before executing the division or taking the log but it doesn't
> always.
>
> The first thing to do is to go into the Studio control cards (where you
> set the simulation time step, start time, etc.) and switch the "debug mode"
> to "true." This will make your simulation run a good bit more slowly but
> will check two conditions that can cause those invalid floating points (it
> checks to see if an output got set to "NaN" and it checks to make sure that
> no Types are writing outside of their allotted OUT() array space.
>
> If that does not lead you to the solution and you are able to run the
> simulation from the compiler in debug mode, it will sometimes stop and
> indicate the line that caused the error.
>
> If neither of those solves the problem, please send me your input file
> and any external files that I need in order to run it and I will see what I
> can do about finding the cause of the error.
>
> Kind regards,
> David
>
>
> a8304506 at graduate.hku.hk wrote:
>
> Hello, Trnsys users.
>
> I get an "Invalid floating point operation" error when running a simulation.
> However, I can't find any information about the error source in the .lst file.
> Does anyone know if there is any method to trace at which component (and
> hopefully at which line) does the error come from? Your reply is appreciated.
> Thank you!
>
> Best Regards
> LEE, Chun Kwong
> Division of Building Science and Technology
> City University of Hong Kong
>
>
>
>
>
>
>
> ------------------------------
>
> _______________________________________________
> TRNSYS-users mailing listTRNSYS-users at cae.wisc.eduhttps://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>
>
> --
> ***********************************************************************
> Thermal Energy System Specialists (TESS), LLC
> David BRADLEY 22 N. Carroll Street - Suite 370
> Partner Madison, WI 53703
> USA
> P: +1.608.274.2577
> F: +1.608.278.1475
> E-mail: bradley at tess-inc.com
> Web Pages: http://www.tess-inc.com and http://www.trnsys.com
>
> ***********************************************************************
>
>
>
> ---------- Forwarded message ----------
> From: David Bradley <bradley at tess-inc.com>
> To: Sebastian Schlott <ses at kbp.de>
> Date: Thu, 30 Apr 2009 12:01:12 -0500
> Subject: Re: [TRNSYS-users] single Room simulation
> Sebastian,
> I would think that all you would need would be Type56 and Type109 (plus
> Type33 and Type69 I think). You can just set the cooling temperature in your
> zones to 24.2C and allow the cooling equipment to have unlimited power, then
> take a look at the maximum cooling load that was required. That should give
> you the required system size. Keep in mind three things:
>
> 1. Type109 reads a typical (average) weather year file - not an extreme one
> and typically (right or wrong) system sizing is done based on a worst-case
> scenario, not on an average year.
>
> 2. If you plan for your lab to have temperature setups and setbacks, your
> max cooling load will be enormous because technically the load is infinite
> when your set point temperature comes back from its set up condition. I
> would recommend using a constant setpoint in order to find your system size.
>
> 3. The Type56 output QSENS is sensible cooling only! In order to get a
> latent component, you must also impose an RH setpoint on the zone and look
> at the QLAT output from Type56. This isn't ideal because often the latent
> cooling is an effect of the sensible cooling (not something that can be
> controlled separately). We wrote a component based on some curve fits that
> calculate the amount of latent cooling that a "cooling coil type" of cooling
> device can do based on zone temperature and ambient wet bulb (If I am
> remembering correctly). Its latent cooling ability turns into a negative
> moisture gain on the space, which is fed back to Type56. The component will
> be part of the TESSLibs 3.0 but for the moment is an individual component.
> Kind regards,
> David
>
>
> Sebastian Schlott wrote:
>
>> My Problem,
>>
>> I have 2 rooms, used as a lab.
>>
>> In this rooms there is a thermal load of 15kw which has to be cooled away.
>>
>> The ambition is the simulation of the room temperature. Target: 24°C +-
>> 0,2 °C
>> Question: Is the installed system strong enough, which systempower do I
>> need?
>>
>> At the moment the installed system has not the ability to cool 15 kw away.
>>
>> is it enough to use the build (type56) and weather data(Type109) to
>> simulate this situation?
>>
>> Mit freundlichem Gruß
>>
>> i. A. Sebastian Schlott
>>
>>
>> ------------------------------------
>> Kuehn Bauer Partner
>> Beratende Ingenieure GmbH
>> Wilhelm-Wagenfeld-Strasse 6
>> 80807 München
>>
>> T: +49 89 189 16-182
>> F: +49 89 189 16-110
>> E: ses at kbp.de
>>
>> Geschäftsführung: Michael Kuehn jr.
>> HRB 102024
>> ------------------------------------
>>
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at cae.wisc.edu
>> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>>
>>
>>
>>
>>
>
> --
> ***********************************************************************
> Thermal Energy System Specialists (TESS), LLC David BRADLEY
> 22 N. Carroll Street - Suite 370 Partner
> Madison, WI 53703 USA
> P: +1.608.274.2577 F: +1.608.278.1475
> E-mail: bradley at tess-inc.com Web Pages: http://www.tess-inc.com and
> http://www.trnsys.com
>
> ***********************************************************************
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090501/ce5b79ea/attachment-0005.htm>
More information about the TRNSYS-users
mailing list