[TRNSYS-users] Very basic question : how to introduce internal walls ?

[Nicolas Heijmans]

Hello,

I have a very basic question about walls that are inside a simulated zone (internal walls).

Imagine that I have an internal wall composed of 18 cm of bricks, 10 m long and 3 m high (in other words : 1 side 30 m², 2 sides 60 m²).

How do I have to introduce it into my .bui project ?

60 m² - 9 cm of bricks - same temperature on back side ?

Thanks !

Nicolas Heijmans
Belgian Building Research Institute (www.bbri.be<http://www.bbri.be/>)
Av. P. Holoffe 21, B-1342 Limelette, Belgium
tel. : + 32 2 655 77 87 fax : + 32 2 653 07 29

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090505/5e34cefe/attachment-0001.htm>