[TRNSYS-users] Type 6 - Auxiliary Heaters

[Tiziano Terlizzese]

Dear TRNSYS-users,
I'm stuck with a very simple problem, but it drives me crazy! I hope someone
can help. I'd like to transfer a constant heat rate to a fluid, so I used
type 6 (auxiliary heaters) with a set point temperature very high (1000°C)
and control function = 1. What I get is a outlet temperature that gets
constant after few hours although is much lower than the set point
temperature. Is there something I miss?
Thanks in advance for your help.

Tiziano Terlizzese