[TRNSYS-users] Interface between thermal zones ( Door and open space)

[A.Thome-08 at student.lboro.ac.uk]

Dear all,

When there are two thermal zones, adjacent to each other, without any door,
just open to each other (I actually maybe should have defined it as ONE
thermal zone only, but did
not because of architectural/orientation issues), how should I represente
the interface between the two zones? For the moment I just did not
specified anything and obviously this is not correct!

Now, If you have an interface ( wall + door = 10m2) with a door (2m2)
between the two thermal zones I have to define two types of "wall", one
which is "door type" (2m2) and the second one which is "internal adjacent"
wall type(8m2)?

Thank you for all the advices!

Arnaud.