[TRNSYS-users] type 557a

[Matt Duffy]

Max,

To watch outputs (and inputs and parameters) for a component, you can use
the TRACE feature. Simply click on the component, and then click on the
footprints icon on the left side of the TRNSYS Simulation Studio. Run the
simulation. This will print the inputs, outputs, and parameters of that
specific component to the listing file, *.lst. However, I am not too
familiar with Type557

Best regards,

Matt Duffy



----- Original Message -----
From: "Max Werlein" <maxwithhat at hotmail.com>
Sent: Tue, July 14, 2009 12:08
Subject:[TRNSYS-users] type 557a


Dear Trnsys users,



While simulating with the type 557a (Ground Heat Exchanger (TESS)) I
discouverd that the heat losses of the earth control volume to the
sides, top and bottom (Outputs: 5,6,7) are generating a peak in a
constant period (roughly 27 hours) while the rest of the time these
outputs are zero. What I actually want is an output of the losses in
every timestep. Does anyone have an idea what is actually calculated by
these outputs? Is there an error in the code?



Thanks in advance



Max
_________________________________________________________________
Enamórate este invierno con MSN Amor y Amistad
http://amor.latam.msn.com/channel/index.aspx?trackingid=202694_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users


----- End of original message -----