[TRNSYS-users] Embedded electrical heating

[Cramer Silkworth]

A,

The basic heating demand output of Type 56 will tell you what the 
electrical heat demand is. Since electric heat is 100% "efficient" and 
most systems are very fast response, the output of type56 is pretty much 
the only thing you need. Just set type 56 to maintain whatever temp you 
want and you're done.

-Cramer

J. Cramer Silkworth
Transsolar Inc.
Technical consulting for energy efficiency and user comfort in 
buildings. Stuttgart - Munich - New York
134 Spring Street Suite 601
New York, NY 10012
212-219-2255
silkworth at transsolar.com


-----Original Message-----
From: A.Thome-08 at student.lboro.ac.uk 
[mailto:A.Thome-08 at student.lboro.ac.uk] 
Sent: Wednesday, July 08, 2009 8:46 AM
To: trnsys-users at cae.wisc.edu
Subject: [TRNSYS-users] Embedded electrical heating



Good afternoon everyone,

I am using TRNSYS for the first time and I have made the modelisation of 
a building using type 56 component. Now, I have to model an embedded 
electrical heating system and I don't know if I should try to model this 
directly in type 56 or if I should use another component.

Any idea?

Thank you very much.
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users