[TRNSYS-users] type111

[Igor Frey]

Hello everyone,
I'm using the type 111 fan, using it for quite high flow rates (100 000 
kg/h)
My problem is that when I set values higher than 50 000 kg/h, the output 
flow rate of the fan is 0.
If I set values between 5000 and 50 000, the simulation stops in the 
first hours and I receive an error message : "the program is not 
answering anymore"
Only values under 5000 are working...
Does anyone see where is the problem ?
Thanks a lot
Igor

-- 
Igor FREY
Ingénieur Thermicien
XYLON Services
6, chemin de Malacher
38240 Meylan
tel : 04 76 18 56 41
fax : 04 80 80 60 47