[TRNSYS-users] "No output's specified"...

[Nicolas Heijmans]

Hello,

When I run this very small model, I get a message from TRNBuild, saying that "No OUTPUT's specified. Please add at least one OUTPUT." This is very strange, because outputs are defined... and if I close TRNBuild, the simulation is carried out.

Any idea about how to solve this issue ?

Thanks,

Kind regards,

Nicolas Heijmans
Belgian Building Research Institute (www.bbri.be<http://www.bbri.be/>)
Av. P. Holoffe 21, B-1342 Limelette, Belgium
tel. : + 32 2 655 77 87 fax : + 32 2 653 07 29

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090723/45a48f88/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Verandas_v2.tpf
Type: application/octet-stream
Size: 157930 bytes
Desc: Verandas_v2.tpf
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090723/45a48f88/attachment-0002.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Verandas_v2.bui
Type: application/octet-stream
Size: 29236 bytes
Desc: Verandas_v2.bui
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090723/45a48f88/attachment-0003.obj>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: PROBE012_0.txt
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090723/45a48f88/attachment-0001.txt>