[TRNSYS-users] Solar thermal panel and auxiliary heating

dias.marcos at portugalmail.pt dias.marcos at portugalmail.pt
Sat Jul 18 08:47:14 PDT 2009


Dear Arnaud,

I'm not very specialist on TRNSYS, but i will give you my opinion:

1) Solar energy is not the best energy to use in space heating. This  
is easy to understand, because in the winter you need big energy  
amounts to heat a house for example, and the solar radiation is in  
it's lower values... so, this is not efficient to use solar energy int  
the winter.

2) Forgetting the previous issue, maybe you will need to put between  
both items: tank and building any equipment. For example a heating  
fan. In my idea, you can't put water directly in a building, you must  
have some equipment that uses that hot water to transfer it's energy  
to the bulding.

I don't have my computer with me, so i'm just giving a opinion without  
trying it.

Good luck!






Quoting A.Thome-08 at student.lboro.ac.uk:

>
>
> Hi,
>
> Sorry, it was not really clear. Maybe because, I just start using TRNSYS, so
> everything is not clear in my head as well at the moment...
>
> The electrical embedded electrical heating system has been modelled using
> the "active layer" in type 56. This is OK.
>
> Now, I try to use the hot water produced by solar panels, to provide
> additional heat to the building and so decrease the use of the embedded
> electrical heating floor.
>
> What I don't manage to do is the link between the different components:
> - Solar panels
> - Tank
> - Auxiliary heating system (classic hot water heater)
> - Building (type56)
>
> Enclosed a print screen of the project... ( a bit messy...)
>
> Thank you very much for the help.
>
> Arnaud
>
>
> Quoting dias.marcos at portugalmail.pt:
>
>> Hi,
>>
>> 1) How are you connecting both thermal and electric systems?...
>> 2) You mention several Types and connections, but i can't figure it
>> out. Can you post a print screen of the project?
>>
>> Best regards,
>> Marcos Dias
>>
>>
>> Quoting A.Thome-08 at student.lboro.ac.uk:
>>
>> >
>> >
>> > Hi everyone,
>> >
>> > I had make the model of an electrical embedded heating floor. Now I try
>> to
>> > decrease the electricity bill of the building. That is why, I would
>> like to
>> > use solar thermal panels (type1) in addition with auxiliary heating
>> systems
>> > (type4 or type92) as sources of heat, to decrease the use of the
>> electrical
>> > embedded heating floor.
>> >
>> > However, I have some difficulties:
>> > 1/ To make the link between type 92 "rate of energy removed" and the
>> heating
>> > system of type56. Should I use the "gains" of type 56 to model the heat
>> > coming from type92?
>> >
>> > 2/ make the connection between the tank (type4c) and the type92.
>> >
>> > Thank you.
>> > _______________________________________________
>> > TRNSYS-users mailing list
>> > TRNSYS-users at cae.wisc.edu
>> > https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>> >
>>
>>
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at cae.wisc.edu
>> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>>
>
>
>
>






More information about the TRNSYS-users mailing list