[TRNSYS-users] TRNOPT's problem

[Matt Duffy]

Dear Dapeng Li,

I apologize for the delay getting back to you. Yes, you will need a TRNSYS
update. I will send you instructions to download the latest version in a
separate email. If anyone else needs an update to TRNSYS 16.01.0003,
please contact your respective TRNSYS distributor.

I am not familiar with the Genopt error. Does the simulation run at least
once in TRNSYS? There are a few things that you can look to shed some
light on the subject. After you install the updated version and TRNOPT,
there is a directory (.\Optiomization\Genopt\Simulation) with a list
(*.lst) file that will usually contain information on why it does not
work.


Best regards,

Matt Duffy
Technical Support Team
Thermal Energy System Specialists
22 N Carroll, Suite 300
Madison, WI  53703
608.274.2577
duffy at tess-inc.com

----- Original Message -----
From: "Dapeng Li" <jiap1120 at gmail.com>
Sent: Fri, January 16, 2009 0:28
Subject:[TRNSYS-users] TRNOPT's problem

Dear Matt and all TRNSYS users,

I have downloaded the updated TRNOPT from the ftp. After I installed it and
run it, the problems I mentioned last email was solved. But when the example
run a cycle (i.e. initial simulation), a new error appear in GENOPT.  Please
refer to the attachment which is the error's screenshot.

My trnsys's version is  16.01.0002. Does it need update?

Thank you!

Dapeng Li


_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users

----- End of original message -----