[TRNSYS-users] FW: CVF6.6

Tue Jan 20 01:53:28 PST 2009

Max, 

These errors seem to indicate that the .obj files used by type 56 are not compatible with your compiler - are you using the correct compile project? (If the problem persists, you should obtain an update for the .obj files for type 56). 

But if you just want to debug your type, I think it is not necessary to recompile trndll.dll (this was the case in old versions of TRNSYS, 15 and before). 

Please look at the attached example: in this configuration, you will NOT be able to debug, as the DLL loaded (white output window) is not the one debugged (blue window on top). 

It doesn't matter if TRNDLL is in debug mode or not, you just need to load the right DLL into the debugger - that sort of problem has nothing to do with TRNSYS in particular, it's the way the debugger works. 

Werner

________________________________

De : Max Werlein [mailto:maxwithhat at hotmail.com] 
Envoyé : mardi 20 janvier 2009 10:11
À : trnsys users
Objet : [TRNSYS-users] FW: CVF6.6

________________________________

From: maxwithhat at hotmail.com
To: bradley at tess-inc.com
Subject: RE: [TRNSYS-users] CVF6.6
Date: Tue, 20 Jan 2009 10:10:30 +0100

I forgot to add the error message i get while compiling the TRNDLL project:

Comv-tm4.obj : error LNK2001: unresolved external symbol _for_read_dir_i8
Comv-tm7.obj : error LNK2001: unresolved external symbol _for_read_dir_i8
Comv-che.obj : error LNK2001: unresolved external symbol _for_read_dir_i8
Comv-deb.obj : error LNK2001: unresolved external symbol _for_read_dir_i8
Comv-tm1.obj : error LNK2001: unresolved external symbol _for_read_dir_i8
Comv-tm2.obj : error LNK2001: unresolved external symbol _for_read_dir_i8
Comv-inh.obj : error LNK2001: unresolved external symbol _for_write_dir_i8
Comv-tm1.obj : error LNK2001: unresolved external symbol _for_write_dir_i8
Comv-tm4.obj : error LNK2001: unresolved external symbol _for_write_dir_i8
Comv-tm7.obj : error LNK2001: unresolved external symbol _for_write_dir_i8
Debug/TRNDll.dll : fatal error LNK1120: 2 unresolved externals
Error executing link.exe.

TRNDll.dll - 11 error(s), 433 warning(s)

Thanks in advance

max

________________________________

Date: Mon, 19 Jan 2009 15:31:58 -0600
From: bradley at tess-inc.com
To: maxwithhat at hotmail.com
CC: trnsys-users at engr.wisc.edu
Subject: Re: [TRNSYS-users] CVF6.6

Max,
 The first thing to make sure of is that you need to rebuild the DLL with your Types from the newly installed CVF. I would also recommend deleting all of the intermediate files that CVF has created in making the new DLL. These are usually in the ..\Trnsys16_1\Compilers\...\Debug and ..\Release folders and have the extension *.obj 
Kind regards,
 David

Max Werlein wrote: 

Dear TRNSYS users,

I have written a type with CVF 6.6. Y could Debug it without any problems before. After reinstalling the computer, I installed both TRNSYS and CVF again implemented my typs, and the simulations run without a problem. When I try to debug the tzpes in CVF the simulation does not stop at the b reakpoints. The simulation just run trough (or gives an error) but does not stop at the setted breakpoints. I suspect the DF60.PDB file to have to do something with the problem because when I debug sometimes CVF asks locate the DF60.PDB file. I indicate the location in the userlibs\debug and then the CVF gives and error and needs to be closed. After this procedure the project does not seem to be debugable anymore. I am a bit confused! Maybe someone can help me?

Tanks in advance 

max

________________________________

¡Y compártelas en Windows Live Fotos! Estas fiestas diviértete tomando fotos. <http://photos.live.com/%20>  

________________________________

_______________________________________________

TRNSYS-users mailing list

TRNSYS-users at cae.wisc.edu

https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users

-- 

***********************************************************************

Thermal Energy System Specialists (TESS), LLC 

David BRADLEY                      22 N. Carroll Street - Suite 370 

Partner                            Madison, WI 53703 

                                   USA

P: +1.608.274.2577 

F: +1.608.278.1475

E-mail: bradley at tess-inc.com 

Web Pages:  http://www.tess-inc.com    and      http://www.trnsys.com

***********************************************************************

________________________________

¡Y compártelas en Windows Live Fotos! Estas fiestas diviértete tomando fotos. <http://photos.live.com/%20> 

________________________________

¡Descúbrelo! ¿Qué puedes hacer con el nuevo Windows Live? <http://www.microsoft.com/latam/windows/windowslive/> 

************************************************************************************
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses.
************************************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090120/abe75f95/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Clipboard01.jpg
Type: image/jpeg
Size: 111971 bytes
Desc: Clipboard01.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090120/abe75f95/attachment-0001.jpg>