[TRNSYS-users] conductive heat flux

[David Bradley]

Marijke,
  I do not think that there is a Type56 output (if indeed you are using 
Type56) that will give you just the conductive portion of the energy 
transfer through the wall. I am not certain but you might find the 
conductive heat flux as a term in one of the BALANCE outputs from Type56.
Kind regards,
 David


Marijke Steeman wrote:
> Dear TRNSYS-users,
>  
> Does someone know if it is possible to get the conductive heat flux
> through a wall directly from TRNSYS? Or is it only possible to consider
> the total heat flux and the heat flux forom radiation separate and then
> subtract the first from the second.
>  
> Thanks in advance.
>  
> Best regards
>  
> ir-arch Marijke Steeman
>  
> Universiteit Gent
> Vakgroep Architectuur en Stedebouw
> Onderzoeksgroep Bouwfysica en Installaties
> Jozef Plateaustraat 22
> B- 9000 Gent
> tel 09 264 37 52 / fax 09 264 41 85
> marijke.steeman at ugent.be <mailto:marijke.steeman at ugent.be>
> ------------------------------------------------------------------------
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>   

-- 
***********************************************************************
Thermal Energy System Specialists (TESS), LLC 
David BRADLEY                      22 N. Carroll Street - Suite 370 
Partner                            Madison, WI 53703 
                                   USA
P: +1.608.274.2577 
F: +1.608.278.1475
E-mail: bradley at tess-inc.com 
Web Pages:  http://www.tess-inc.com    and      http://www.trnsys.com

***********************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090204/e0870982/attachment-0005.htm>