[TRNSYS-users] lighting control

[Patrick Wilkinson]

I am trying to control the lighting in my building in TRBUILD. The
wizard uses "total horizontal rad" as the boundary conditions for
turning on and off the lighting. How does this work? Is there any
approach in determining the actual LUX level within the building/work
area? (similar to VisDOE)

 

I am using TYPE 687 for the windows, so I have the transmitted
illumination at my deposal. (lumens)

 

Thanks

Patrick Wilkinson, B.Sc. ENG, LEED(r) AP
Advanced Technology Group

 

 
14130 Riverside Drive Suite 201
Sherman Oaks, CA 91423
p:   (818) 377-8220 ext. 240
f:    (818) 377-8230
www.ibece.com

 

 

 

This e-mail message, including any attachments, is for the sole use of
the intended recipient(s) and may contain confidential and privileged
information. Any unauthorized review, use, disclosure, or distribution
is prohibited. If you are not the intended recipient, please contact the
sender by reply e-mail and destroy all copies of the original message

 

 .

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090206/2ac98eb3/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1658 bytes
Desc: image002.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090206/2ac98eb3/attachment-0002.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 2614 bytes
Desc: image003.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090206/2ac98eb3/attachment-0003.jpeg>