[TRNSYS-users] MIN allowed floerate Active layer Building

[Nicola Sorbi Unipg]

Dear all,

I have a trouble in the definition of active layer of a radiative heating
floor.

May bee my file has a bug because Type 56 couldn't calculate the min.
allowed inlet mass flowrate as showed below.

Wath's it wrong?

Regards and Happy new year!!!!

 

 





                    Dott. Ing. Nicola Sorbi

              

          UNIVERSITA' DEGLI STUDI DI PERUGIA

           Dipartimento di Ingegneria Industriale

           Via G. Duranti 1A/4 - 06125 Perugia

           Tel. +39 075/5853930 - Fax. +39 075/5853736 

           E-mail nicolasorbi at mach.ing.unipg.it



 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20091228/0fc72395/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 41514 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20091228/0fc72395/attachment-0009.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 4692 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20091228/0fc72395/attachment-0010.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.jpg
Type: image/jpeg
Size: 3625 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20091228/0fc72395/attachment-0011.jpg>