[TRNSYS-users] Type 71 and Type 1e

[Haluf, Christopher]

Dear Matt,

I've attached a simple example that shows the mentioned behavior. There is just a pump and a flat plate collector using IAM's (Type 1e). I used the example-IAM data delivered by TRNSYS. I also used the default wheater data (Madison) for Type 15-2. But it doesn't matter which wheater data I use, it's always the same behavior. In this example, you can see the described peeks, the temperatures go up to 800-1000°C.

Thank you!


Mit freundlichen Grüßen / Kind regards
Christopher Haluf
Intern


Siemens AG
Corporate Technology
CT PS 3
Günther-Scharowsky-Str. 1
91058 Erlangen, Deutschland
Tel.: +49 (9131) 7-24724
Fax: +49 (9131) 7-21339
mailto:christopher.haluf at siemens.com

Siemens Aktiengesellschaft: Vorsitzender des Aufsichtsrats: Gerhard Cromme; Vorstand: Peter Löscher, Vorsitzender; Wolfgang Dehen, Heinrich Hiesinger, Joe Kaeser, Barbara Kux, Hermann Requardt, Siegfried Russwurm, Peter Y. Solmssen; Sitz der Gesellschaft: Berlin und München, Deutschland; Registergericht: Berlin Charlottenburg, HRB 12300, München, HRB 6684; WEEE-Reg.-Nr. DE 23691322


________________________________
Von: Matt Duffy [mailto:duffy at tess-inc.com]
Gesendet: Wednesday, December 16, 2009 5:03 PM
An: Haluf, Christopher; trnsys-users at cae.wisc.edu
Betreff: Re: [TRNSYS-users] Type 71 and Type 1e


Dear Chistopher,

Not sure why that is happening. If you would like to pass along your *.tpf, I will try to take a look.

Best regards,

Matt Duffy

----- Original Message -----
From: "Haluf, Christopher" <christopher.haluf at siemens.com>
Sent: Mon, December 14, 2009 3:03
Subject: [TRNSYS-users] Type 71 and Type 1e

Dear Users,

I have another problem using Solar Thermal Collectors.

Type 71 and Type 1e (Evacuated Tube Collectors and Flate Plate Collectors) show very strange behaviors. I just modelled a very easy system, including a pump and a collector using wheater data reader Type 15-2. When I run a simulation for one year, both have a lot of peeks where the fluid outlet temperatures are very high, about 5000°C. I don't think that this is realistic :)

Has someone of you already had the same problems or does anybody know where the problem is?

Thanks in advance!

Mit freundlichen Grüßen / Kind regards
Christopher Haluf
Intern

Siemens AG
Corporate Technology
CT PS 3
Günther-Scharowsky-Str. 1
91058 Erlangen, Deutschland
Tel.: +49 (9131) 7-24724
Fax: +49 (9131) 7-21339
mailto:christopher.haluf at siemens.com

Siemens Aktiengesellschaft: Vorsitzender des Aufsichtsrats: Gerhard Cromme; Vorstand: Peter Löscher, Vorsitzender; Wolfgang Dehen, Heinrich Hiesinger, Joe Kaeser, Barbara Kux, Hermann Requardt, Siegfried Russwurm, Peter Y. Solmssen; Sitz der Gesellschaft: Berlin und München, Deutschland; Registergericht: Berlin Charlottenburg, HRB 12300, München, HRB 6684; WEEE-Reg.-Nr. DE 23691322


________________________________

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu<javascript:bodyCreateMail('TRNSYS-users%40cae.wisc.edu')>
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20091217/1144993f/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Type1e.tpf
Type: application/octet-stream
Size: 77550 bytes
Desc: Type1e.tpf
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20091217/1144993f/attachment-0001.obj>