[TRNSYS-users] Question

[senne plessers]

Dear all,

 

I recently start using trnsys16, now I have to implement a house that has 

an active layer in the floor and in the ceiling. To supply the heating I added 

a thermal storage (type60t) that is connected to the actieve layer and the

heating in trnbuild. 

 

Now I want to control this heating or storage tank, I want to turn off the heating

when the temperature rises above a certain value, because above this value it is 

not necessary to produce heat. I thought I had to do it with type2 but it doesn't

seem to work. Is there a way to shut the heating off in these periods? Or am I 

doing something wrong with my parameters and inputs? I follow this procedure:

 

Upper input temperature=25

Lower input temperature I connect with the temperature of a thermal zone

Monitoring temperature=0

Upper dead band = 5

Lower dead band=0

The output control function I connect with the input of the heating

 

 

Kind Regards,

 

Senne

_________________________________________________________________
Je hele online leven op één stek met Windows Live
http://www.microsoft.com/belux/nl/windows/windowslive/default.aspx
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090820/f5695ca9/attachment-0005.htm>