[TRNSYS-users] Importing DXF file to SimCad

manoj kumar singh mksinghtu at gmail.com
Sat Aug 15 06:01:21 PDT 2009


Hello,

I am Research Scholar at IIT Delhi, I have one 2D drawing in CAD(DXF)
format. I want to import it in SIMCAD to define wall, window and door
properties. I tried but failed to do it. I have also gone through chapter 6
of SIMCAD manual "Transforming DXF formatted drawings". I am using TRNSYS
15. The DXF file is attached in zip format with this mail. If any one have
an experience of the transformation of DXF files, Kindly give me the
guidance how should I approach to this problem.

I will be grateful to all Trnsys users.

With Regards,
-- 
MANOJ KUMAR SINGH
 RESEARCH SCHOLAR
 INSTRUMENT DESIGN AND DEVELOPMENT CENTRE (IDDC)
 IIT DELHI
 HAUZ KHAS, NEW DELHI 110016
 INDIA.

Alternate E mail :- mksinghtu at rediffmail.com

MOBILE NO. 09868820037

RESIDENTIAL ADDRESS

 MANOJ KUMAR SINGH
 RESEARCH SCHOLAR
 ZASKAR HOSTEL, ROOM NO WC-12,
 IIT DELHI
 HAUZ KHAS, NEW DELHI 110016
 INDIA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090815/8b6f0a18/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: manojsir_dxf.zip
Type: application/zip
Size: 8450 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20090815/8b6f0a18/attachment-0005.zip>


More information about the TRNSYS-users mailing list