[TRNSYS-users] Problem with Type 109

[Kanokwan Sodata]

Dear all,

I had a problem after i run User TMY. I've found that the result of  the
ambient temp from Type 109 is always higher than the air temp in zone.
Moreover, the value from Radiation which i use to be input file on Type 109
, it doesn't show up in the result file after run. its only show 0.
Basically, If i compare with the result from my Experiment. The air
temperature in zone should be higher than ambient temp because i use the
same ambient temp data for input in Type 109.

User Tmy which is input for Type 109 , it was from my experimental. I
propose to use the result air Temp in zone from Type109 to verify with my
Exp.

Best regards,
Sodata

Post graduate. Chiang Mai University,Thailand
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080930/988411f6/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: East-min.109
Type: application/octet-stream
Size: 9032 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080930/988411f6/attachment-0005.obj>