[TRNSYS-users] Solar Cooling

[Thomas Kaschub]

Hello Nikoleta,

> 1) Type 107
You cannot easily change the hot water inlet temperatures in the 
external file. The physical effect would be, that the absorption 
chiller then operates with lower hot water temperatures but with the 
same capacity and COP. This will give results that are significant 
better.

> 2) Temperature in tank
In your explanations the coherences stay unclear.
Did you try to use another tank (e.g. Type 4)?
Are the components adjusted to each other?
Are your implemented control mechanisms working properly?

Maybe this helps to find your error.

All the best
Thomas