[TRNSYS-users] an output in time "t" as input in "t+1"

[Ratnalee Patil]

Hi Camilo,

Have you tried Type 93 - input value recall?
 
Ratnalee Patil
Graduate Student
Concordia University
Montreal, Canada

Any design element that has only one function is probably a mistake or a missed opportunity. 
- Amory B. Lovins, 'Green Development', Rocky Mountain Institute




-----Inline Message Follows-----

________________________________

Yahoo! MTV Blog & Rock
¡Cuéntanos tu historia, inspira una canción y gánate un viaje a los Premios MTV!
Participa aquí http://mtvla.yahoo.com/
Hi

I have de fallow problem: I need take an output simulation temperature in time "i" as input in the same system in time "i+1". I have a simple example, a auxiliar cooling unit connect to a new equation unit that take a energy amount and calculate the outlet temperature, this temperature is the input to the cooling unit again and the result are not good. I like know the correct form to solve this problem.

Thank you

regards

Camilo Arias 

Pd: Attach the example

 
________________________________

Yahoo! MTV Blog & Rock
¡Cuéntanos tu historia, inspira una canción y gánate un viaje a los Premios MTV!
Participa aquí http://mtvla.yahoo.com/_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080910/b1f4d375/attachment-0005.htm>