[TRNSYS-users] TRNFLOW problem

[Marit Béguin]

Dear all,
 
I have a problem with the air flow network defined in TRNBuild when
using TRNFLOW. I define my interior zones, save the .bui file and close the
TRNBuild window. 
However, when I edit again the same file in TRNBuild, all of the interior
zone
nodes are automatically changed to nodes with constant pressure of 0
Pa. Does anyone know why this happens and how could it be solved?
 
Thank you in advance for your help,

 

 

Met vriendelijke groet,
Marit Béguin, junior projectleider
Cauberg-Huygen R.I. B.V.

Logo Cauberg-Huygen R.I. B.V.


Bezoekadres:

Wilhelm Röntgenstraat 4 8013 NE Zwolle


Postadres:

Postbus 1590 8001 BN Zwolle


Telefoon:

038-4221411


Fax:

038-4223197


E-mail:

m.beguin at chri.nl


Web:

www.chri.nl <http://www.chri.nl/> 


Disclaimer:

Op deze e-mail is een disclaimer van toepassing:
A disclaimer is applicable to this e-mail, please refer to:
 <http://www.chri.nl/emaildisclaimer> http://www.chri.nl/emaildisclaimer

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080909/0cb5136c/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 7599 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20080909/0cb5136c/attachment-0005.gif>