[TRNSYS-users] Question about error in TRNBUILD file

[Bader Daniel]

Hello Jurgen again,

 

or maybe it's a missing or wrong defined parameter in a shading type (for example Type 34 - receiver azimuth).

 

Daniel Bader

 

GN Bauphysik Ingenieurgesellschaft mbH

Bahnhofstr. 27

70372 Stuttgart

Tel.: 0711-9548800

Fax: 0711-564613

www.gn-bauphysik.com <http://www.gn-bauphysik.com/> 

Geschäftsführer: Dipl.-Ing. (FH) Manfred Finkenberger

Sitz der Gesellschaft: Stuttgart, HRB 14870

 

Von: Jurgen Tyvaert [mailto:jurgen.tyvaert at UGent.be] 
Gesendet: Freitag, 31. Oktober 2008 10:11
An: trnsys-users at engr.wisc.edu
Betreff: [TRNSYS-users] Question about error in TRNBUILD file

 

Hello,

 

I find trouble in running my TRNBUILD file in simulation studio.

The program gives the following error 4 times:

 

Message               :  iniglasdata: value negative or greater than 1 for nonvisual absorption W4_front was found after fitting for Window-ID          1 : abs_nonvis= -
                                    .0008717874 at angle =          0

 

When we changed all the windows in the TRNBUILD file to one and the same type of window, the simulation gave no errors, but in reality some windows have a

different U-value which cannot be neglected.

 

Does somebody know the solution to this problem?

 

Kind regards,

 

Jurgen Tyvaert

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20081031/a089f46d/attachment-0005.htm>