[TRNSYS-users] Time steps on Studio (deck) and Build

[David Bradley]

Carlos,
 You might want to refer to section 8.5 of the 08-Programmer's Guide 
manual for instructions on how to modify existing components and 
recompile them. For instructions on how to modify and create new 
proformas, you may refer to section 2.3 of the 02-Simulation Studio manual.
Kind regards,
 David


Carlos Flores wrote:
> To be more clear David,
>
> I've got a .FOR file from a particular type in TRNSYS (Type 396, 
> parabolic trough field model). The thing is that this model would not 
> work in a proper way for my purposes because it was done thinking in a 
> power station and not in a smaller-size heating plant.
>
> So, I want to modify it a bit and therefore, create a new proforma 
> that would be a modification of the type 396. 
>
> So, in this context... how do I create my new proforma, given this 
> fortran source code?
>
> Thanks again, best regards
>
> Carlos
> PRIEN, Universidad de Chile
>
>
>
>
>
>
> On Tue, Oct 7, 2008 at 12:03 PM, Carlos Flores <karlitro at gmail.com 
> <mailto:karlitro at gmail.com>> wrote:
>
>     Hey David,
>
>     That's my question. Can I just edit directly the .FOR file (along
>     with the proper changes at the parameter, imput and output tabs)
>     and then compile it to obtain a different module? Is that simple?
>
>     Wait for your answer, thanks!
>
>     Carlos
>
>
>
>
>
>     On Tue, Oct 7, 2008 at 11:12 AM, David Bradley
>     <bradley at tess-inc.com <mailto:bradley at tess-inc.com>> wrote:
>
>         Carlos,
>          In addition to modifying the proforma, if you change
>         something in the Fortran code, you have to recompile that code
>         and generate a new STEC Library DLL.
>
>          There is no method for automatically generating a proforma
>         from Fortran code. To create a proforma, select "New
>         Component" from the File: New menu. Specify the Type number on
>         the first tab and then specify all of the parameters, inputs,
>         and outputs on the third tab. If a proforma exists for your
>         component already, you can double click it from within the
>         Direct Access tool (instead of selecting it and moving it out
>         into your project), then modify it.
>
>         Kind regards,
>          David
>
>
>         Carlos Flores wrote:
>>         Hi there,
>>
>>         I'm using the STEC library I received from the german DLR. I
>>         want to make a little change to it, and I have the source
>>         code (file.for).
>>
>>         My question is, how do I generate a proforma out of the .FOR
>>         file? That's all I need, how do I generate the proforma file
>>         out of the fortran code (that is already done and should work
>>         fine cause is pretty much the same than before but with a
>>         very small change).
>>
>>         Thanks for the time,
>>
>>         Carlos
>>         ------------------------------------------------------------------------
>>         _______________________________________________ TRNSYS-users
>>         mailing list TRNSYS-users at cae.wisc.edu
>>         <mailto:TRNSYS-users at cae.wisc.edu>
>>         https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users
>
>         -- 
>         ***********************************************************************
>         Thermal Energy System Specialists (TESS), LLC 
>         David BRADLEY                      2916 Marketplace Drive - Suite 104 
>         Partner                            Madison, WI 53719 
>                                            USA
>         P: +1.608.274.2577 
>         F: +1.608.278.1475
>         E-mail: bradley at tess-inc.com <mailto:bradley at tess-inc.com> 
>         Web Pages:  http://www.tess-inc.com    and      http://www.trnsys.com
>
>         ***********************************************************************
>
>
>

-- 
***********************************************************************
Thermal Energy System Specialists (TESS), LLC 
David BRADLEY                      2916 Marketplace Drive - Suite 104 
Partner                            Madison, WI 53719 
                                   USA
P: +1.608.274.2577 
F: +1.608.278.1475
E-mail: bradley at tess-inc.com 
Web Pages:  http://www.tess-inc.com    and      http://www.trnsys.com

***********************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20081007/ecb243c7/attachment-0005.htm>