[TRNSYS-users] temperature with time step < 1hour

[Marijke Steeman]

Dear TRNSYS-users, 

If I run a simulation with a zone in which the temperature is free floating, and
I use a timestep < 1hour, the output temperature of that zone is not "smooth", 
it looks as there is not interpolation between steps < 1hour. Does anyone knows 
what can cause this effect? 

Regards,


ir-arch Marijke Steeman

Universiteit Gent
Vakgroep Architectuur en Stedebouw
Onderzoeksgroep Bouwfysica en Installaties
Jozef Plateaustraat 22
B- 9000 Gent
tel 09 264 37 52 / fax 09 264 41 85
marijke.steeman at ugent.be
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20081127/bc96a8bd/attachment-0005.htm>